| 製品 |
NUC-325H, NUC-358H, NUC-N97(D5), SBC-377E, SBC-377P, SBC-375P, SBC-375M, SBC-264, IMB-1249-WV, IMB-1248-WV, IMB-1247, IMB-1246, IMB-1317, IMB-X1317, IMB-X1317-10G, IMB-1715, IMB-X1715, IMB-X1715-10G, IMB-1012, IMB-A1003, IMB-A1302, IMB-A395, NUC-N97(D4), NUC-125H R2, NUC-155H R2, SBC-370P, SBC-370M, SBC-370V, SBC-371P, SBC-371M, IMB-A8000P, IMB-A8000S, IMB-A8000M, IMB-A8000V, IMB-1714, IMB-X1714, IMB-1245P-WV, IMB-1245M-WV, SBC-261J, IMB-1250P-WV, IMB-1250M-WV, IMB-1240-WV, IMB-X1240-WV, IMB-A1002
|
| 回答 |
Due to variations in hardware design, motherboards may supply +5VSB power to the AI-OOB-LITE Kit in different ways.
Please refer to the table below to confirm the correct connection method for your specific MB model.
|
Supply +5VSB power
|
Model
|
|
From System Panel Header (PANEL1)
|
NUC-325H, NUC-358H, NUC-N97(D5), SBC-377E, SBC-377P, SBC-375P, SBC-375M, SBC-264, IMB-1249-WV, IMB-1248-WV, IMB-1247, IMB-1246, IMB-1317, IMB-X1317, IMB-X1317-10G, IMB-1715, IMB-X1715, IMB-X1715-10G, IMB-1012, IMB-A1003, IMB-A1302, IMB-A395
|
|
From USB 2.0 Header (2.00 mm)
|
NUC-N97(D4), NUC-125H R2, NUC-155H R2, SBC-370P, SBC-370M, SBC-370V, SBC-371P, SBC-371M, IMB-A8000P, IMB-A8000S, IMB-A8000M, IMB-A8000V,
|
|
From USB 2.0 Header (2.54 mm)
|
IMB-1714, IMB-X1714
|
|
From HEATER1 Header (HEATER1)
|
IMB-1245P-WV, IMB-1245M-WV, SBC-261J, IMB-1250P-WV, IMB-1250M-WV, IMB-1240-WV, IMB-X1240-WV, IMB-A1002
|
Connect method:
- PWR from System Panel header:
|
AI-OOB-LITE Kit
|
Description
|
|
JP1
|
Set at Pin1-3
|
|
PANEL1/PANEL2
|
Connect to the Panel header on the motherboard based on the connector size
|
|
PCIE1
|
Connect to the PCIE connector on M2E-OOB
|
Example:
- PWR from USB 2.0 Header (2.00 mm):
Note: PWR from USB header needs SPECIAL BIOS support, please contact Technical Support.
|
AI-OOB-LITE Kit
|
Description
|
|
JP1
|
Set at Pin3-5
|
|
PANEL1/PANEL2
|
Connect to the Panel header on the motherboard based on the connector size
|
|
PCIE1
|
Connect to the PCIE connector on M2E-OOB
|
|
USB0
|
Connect to the USB 2.0 Header on the motherboard
|
Example:
- PWR from USB 2.0 Header (2.54 mm):
Note: PWR from USB header needs SPECIAL BIOS support, please contact TSD for further support.
|
AI-OOB-LITE Kit
|
Description
|
|
JP1
|
Set at Pin3-5
|
|
PANEL1/PANEL2
|
Connect to the Panel header on the motherboard based on the connector size
|
|
PCIE1
|
Connect to the PCIE connector on M2E-OOB
|
|
USB0
|
Connect to the USB 2.0 Header on the motherboard
|
Example:
- PWR from HEATER1 Header (HEATER1):
Note: PWR from HTR header needs SPECIAL BIOS support, please contact Technical support.
|
AI-OOB-LITE Kit
|
Description
|
|
JP1
|
Set at Pin3-5
|
|
PANEL1/PANEL2
|
Connect to the Panel header on the motherboard based on the connector size
|
|
PCIE1
|
Connect to the PCIE connector on M2E-OOB
|
|
USB0
|
Connect to the Heater header on the motherboard
|
Example:
|