2026-05-12 ASRock Industrial Introduces iEP-5010G-DCN, an ATEX & C1D2-certified Edge Controller for Hazardous Environments
Taipei, Taiwan (May 12, 2026) – ASRock Industrial announces the launch of the iEP-5010G-DCN, a fanless industrial controller engineered for deployment in hazardous and safety-regulated environments. Powered by the Intel® Atom® x6425RE processor (Elkhart Lake) and supporting In-band ECC memory, the iEP-5010G-DCN delivers robust performance, flexible IOs, and expansion optimized for industrial automation and distributed edge control. Designed for extreme industrial conditions, the system operates within a wide temperature range of -40°C to 70°C, supports high-altitude deployment up to 3000 meters, and features 6-36VDC wide-range power input, and long-term lifecycle availability. Certified for ATEX Zone 2 and UL C1D2 hazardous environments, and reinforced with conformal coating protection validated to EIA-364-65A Class IIIA corrosion standards, the platform supports reliable operation in G3-level industrial environments. The iEP-5010G-DCN enables intelligent edge computing directly within explosive and corrosive environments. Combining rugged reliability with hazardous-location compliance in a compact, rugged design, the platform is primed for oil and gas facilities, mining and metals operations, chemical plants, water and wastewater, and energy infrastructure requiring continuous, safety-certified edge performance.
iEP-5010G-DCN: Edge Controller with Intel® Atom® for Hazardous Sites
Powered by the Intel® Atom® x6425RE processor (Elkhart Lake), the iEP-5010G-DCN delivers robust processing optimized for industrial automation, distributed control systems, and real-time field monitoring. Supporting up to 32GB DDR4 3200MHz SO-DIMM memory with In-band ECC, the platform ensures data integrity and enhanced system reliability, providing the computing headroom required for data acquisition, control logic execution, and edge-level analytics. Designed for long-lifecycle support, the system enables stable, continuous operation with responsive processing for machine coordination, process control, and industrial communication workloads. Its balanced performance architecture ensures reliable edge intelligence in environments where operational consistency and uptime are critical.
iEP-5010G-DCN: Certified for Hazardous Deployment
The iEP-5010G-DCN meets ATEX Zone 2 and UL Class I Division 2 hazardous-location certifications, qualifying the system for deployment in facilities where explosive gases or combustible vapors may be present during normal operations, such as oil and gas plants, chemical refineries, and mining sites. It also features conformal coating protection tested to EIA-364-65A Class IIIA, supporting reliable operation in G3-level corrosive industrial environments. By meeting these international hazardous-location standards at the system level, the iEP-5010G-DCN allows industrial operators to deploy edge control systems directly inside Zone 2 areas rather than relocating them to non-classified control rooms. This architecture reduces wiring distance, improves signal integrity, enables faster response time for process control, and simplifies overall system layout within regulated facilities. For system integrators and plant operators, this translates into easier compliance validation, reduced installation complexity, and the ability to bring data acquisition, monitoring, and control closer to hazardous production zones.
Versatile I/Os and Rugged Industrial Design
The iEP-5010G-DCN provides comprehensive networking connectivity with four Intel® 1GbE LAN ports and one Intel® 2.5GbE LAN port, supporting Intel® TCC/TSN real-time computing for reliable industrial communication across distributed edge networks. It offers rich I/O ports, including two USB 3.2 Gen2, two RS-232/422/485 serial ports, one HDMI 2.0b, and system diagnostic indicators for operational visibility and maintenance. For storage, it integrates one M.2 2280 Key M slot supporting PCIe Gen3 x2 NVMe SSD to deliver fast and dependable local data access for industrial workloads. Engineered for demanding field deployment, the system supports a wide 6-36V DC input via a 3-pin terminal block with built-in over-voltage, under-voltage, over-current, and 80V surge protection to ensure stable operation in fluctuating power environments. Its compact 58mm x 125mm x 157mm (W x D x H) chassis features a fanless thermal design and supports DIN-rail or wall mounting configurations, enabling flexible installation within control cabinets and industrial enclosure. Designed to withstand harsh industrial conditions, the platform operates within a wide temperature range from -40°C to 70°C and supports deployment at altitudes up to 3,000 meters, and resists vibration, shock, and electrostatic discharge typical of heavy industrial sites.
For more information about the iEP-5010G-DCN, please visit our Website or contact us at Product Inquiry.